2.9 [3] Group
Line Hunting Order
Specifies the trunk hunting sequence for the trunk group. The hunting sequence can be programmed
to start from the lowest or highest numbered trunks, or to rotate uniformly among all trunks.
Value Range
High -> Low, Low -> High, Rotation
Maintenance Console Location
2.9.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
2.16.1 [10-1] CO Line Settings
Feature Guide References
1.5.5.3 Trunk Access
CO-CO Duration Time
Specifies the length of time that a trunk-to-trunk call can be maintained before being disconnected.
Value Range
None, 1–60 min
Maintenance Console Location
2.9.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
2.16.1 [10-1] CO Line Settings
Feature Guide References
1.11.8 Trunk Call Limitation
Extension-CO Duration Time
Specifies the length of time that an extension-to-trunk call can be maintained before being
disconnected.
Value Range
None, 1–60 min
Maintenance Console Location
2.9.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings
2.8.17 [2-9] System Options
2.16.1 [10-1] CO Line Settings
466
PC Programming Manual