2. User-supplied items
To complete your installation, you need the following items.
Requirements for all installations
•
A personal computer (PC) that will act as a management console (see
Requirements for management on page
•
A host server configured as described under
on page 6
•
Internet access and a supported browser, with pop-up blockers disabled
(see
•
Optional: A standard 19-inch rack, mounting hardware, and rack-
mounting documentation if the storage system is to be rack mounted
1 Gbps iSCSI installation requirements
•
An IP address, subnet mask, gateway (if applicable), and 5e or
category 6 Ethernet cable for each 1Gbps iSCSI data port that will
connect to your storage network.
•
A host server that contains at least one iSCSI host bus adapter (HBA)
or network-interface card (NIC), and a supported iSCSI initiator (see
Host server requirements on page
•
Optional: a Gigabit Ethernet LAN switch for switch configurations
10 Gbps iSCSI installation requirements
•
An IP address, subnet mask, gateway (if applicable), and a 50/125µm
multimode OM2 or OM3 cable for each 10 Gbps iSCSI data port that will
connect to your storage network
•
A host server that contains at least one iSCSI host bus adapter (HBA)
or network-interface card (NIC), and a supported iSCSI initiator (see
Host server requirements on page
•
Optional: a 10 Gbps Ethernet LAN switch for switch configurations
Fibre Channel installation requirements
•
A multimode fiber-optic cable for each Fibre Channel port that will
connect to your storage network (see
•
A host server that contains at least one Fibre Channel host bus adapter
(HBA) (see
•
Optional: a Fibre Channel switch for switch configurations
4
Requirements for management on page
Host server requirements on page
Hitachi AMS 2100/2300 Getting Started Guide
5).
Host server requirements
5)
6)
6)
Table 1-1 on page
6)
1-5)