Disable/Enable
Domain Name
Mail Server Address
From Address
Send to Address
Reply To Address
Configure management ports
In the Set up Management Ports page:
1. Configure the controller management ports manually or automatically
(see
2. Click Next.
3. Proceed to
Figure 1-20: Set up Email Alert Page
Table 1-4: Enabling Email Notifications
Field
To enable email notifications, click Enable, complete the
remaining fields, and record your settings in
page 49.
Domain appended to addresses that do not contain one.
Email address or IP address that identifies the base unit as
the source of the email.
Each email sent by the base unit will be identified as being
sent from this address.
Up to 3 individual email addresses or distribution lists
where notifications will be sent or blind copied (Bcc).
Email address where replies can be sent.
Figure 1-21 on page 28
Set up host ports on page
Hitachi AMS 2100/2300 Getting Started Guide
Description
and
Table 1-5 on page
29.
Table 1-10 on
1-28).
27