8. Connect cables to the base unit
1. Make the connections to the rear panel of the base unit using the
appropriate figures on the following pages.
Figure 1-7: Rear of AMS 2100 Base Unit with 1 Gbps iSCSI Controller
Figure 1-8: Rear of AMS 2300 Base Unit with 1 Gbps iSCSI Controller
Legend:
Controller 1
Controller 1
Fibre Channel connectors
Maintenance LAN connector (service personnel only, disabled port)
Navigator 2 connector (connect to management console PC)
Connector for UPS cable
PATH#1 and PATH#0 expansion connectors (see
1 Gbps iSCSI ports
(For other port types, see
AC power receptacle
Hitachi AMS 2100/2300 Getting Started Guide
Figure 1-6 on page
Figure 1-9
and
Figure 1-10 on page
Controller 0
Controller 0
1-12)
1-14)
13