Hitachi AMS 2100 Getting Started Manual page 47

8. Click Next. A page similar to the one in
Figure 1-38: Create or Select Host Group/iSCSI Target Page
9. Select the physical port for the host group.
10.Create new host groups or use ones that already exist:
To create new host groups:
a. Click Assign now if it is not selected.
b. Select Create a new host group.
c. In the Host Group No field, enter a host group number from 1 to
127.
d. In the Name field, enter a host group name from 1 to 32 characters.
e. Select a Platform or Middleware setting, or both, if appropriate for
your configuration (refer to the Navigator 2 online help).
To use host groups that have already been created:
a. Select Use an existing host group.
b. Use the Host Group drop-down list to select a host group.
11.Click Next. The Connect to Hosts page appears (see
page 46).
Hitachi AMS 2100/2300 Getting Started Guide
Figure 1-38 appears.
Figure 1-39 on
45