Removing The Trimmer Dc Controller Pcb - Canon Booklet Trimmer-A1 Service Manual

CHAPTER 3 MECHANICAL SYSTEMS

3.3 Removing the Trimmer DC Controller PCB

1) Open the front cover, and detach the up-
per cover. (See 1.2)
2) Remove the screw [1], 5 supports [2]
and 5 connectors [3], and detach the
Trimmer DC Controller PCB [4].
In case the Trimmer DC Con-
troller PCB has been replaced
with a new one, VR1 adjustment
(LCD brightness adjustment)
and DSW3 setting must be com-
pleted. (See Chapter 5, for de-
tails)
3-16
COPYRIGHT© 2002 CANON INC.
F03-303-01
2000 CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002