Basic Construction - Canon Booklet Trimmer-A1 Service Manual

CHAPTER 1 GENERAL DESCRIPTION

6 Basic Construction

6.1 Functional Construction
As shown in the following diagram, the machine consists of the feeding section, cutter
section, pressing section and stacker section.
[1]
[1] Stacker section
[2] Pressing section
The trim process (i.e. paper feeding process) differs by the trim Designation
Modes; Designating method of the trim designation modes are different be-
tween the trim operation modes; in LOCAL mode to be designated in the
trimmer's control panel, in SYSTEM mode to be designated in its host
copier's control panel.
1-16
[2]
F01-601-01
COPYRIGHT© 2002 CANON INC.
[3]
[3] Cutter section
[4] Feeding section
2000 CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002
[4]