5.9 Removing the Cutter Motor (M102)
Before starting to remove the
cutter motor, you must make
sure that the cutting operation
of the trimmer has ended nor-
mally (i.e., the phase of the cut-
ter motor must be in home posi-
tion, so that the cutter motor
may correctly be replaced).
Removing the Cutter Motor
1) As shown in 5.3, remove the lower
press assembly.
2) Remove the 5 screws [1], and discon-
nect the 2 connectors [2]; then, detach
the cutter motor (M102) [3].
COPYRIGHT© 2002 CANON INC.
2000
CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002
CHAPTER 3 MECHANICAL SYSTEMS
F03-509-01
F03-509-02
3-33