4) Remove the screw [1], and detach the
waste bin full sensor (PS109) [2]. Then,
remove the screw [3], and detach the
inlet sensor (PS101) [4].
2.5 Removing the Cutter Blade (upper, lower)
1) Open the front cover, and detach the
right front cover 2, upper cover, and
rear cover. (See 1.2 through 1.4.)
2) Perform steps 2) through 4) under 2.2
"Removing the Feeding Belt from the
Upper Feeding Assembly."
3) Remove the 3 screws [1], and detach the
roller cover plate [2].
COPYRIGHT© 2002 CANON INC.
2000
CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002
CHAPTER 3 MECHANICAL SYSTEMS
F03-204-02
F03-205-01
3-11