Removing The Sensor (Press Assembly Bottom Plate) - Canon Booklet Trimmer-A1 Service Manual

6.8 Removing the Sensor (press assembly bottom plate)

1) As shown in 1.3, remove the rear cover.
2) Put your hand under the base plate of
the trimmer, and free the claw [1] of the
sensor claw. Detach the sensor [2], and
disconnect the connector.
COPYRIGHT© 2002 CANON INC. 2000 CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002
CHAPTER 3 MECHANICAL SYSTEMS
F03-608-01
F03-608-02
3-43