Adjusting The Trim Width - Canon Booklet Trimmer-A1 Service Manual

2.1.3 Adjusting the Trim Width

Make adjustments so that the trim width is 3.5 mm or more.
Folding face
A trim fault will start to occur when the trim width is less than 3.5 mm; be
sure it is 3.5 mm or more.
• The following is the range of adjustment for trimming width. (A shift is made in the di-
rection of +/- on the above figure; the width may be any width greater than 3.5 mm).
11 × 17 (279 × 432)
A3
B4
A4R
LTRR
COPYRIGHT© 2002 CANON INC.
Paper stack
Paper size (mm)
(297 × 420)
(257 × 354)
(210 × 297)
(216 × 279)
2000 CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002
Reference point <0 mm>
F00-201-02
Shift (mm) Default (mm)
-3.4 to 10.2
-9.5 to 10.2
-10.3 to 10.2
-10.3 to 10.2
-10.3 to 7.3
T00-201-01
USER MODE
[Factory setting] 3.5 mm
Trimming area
0
0
0
0
0
Shift interval: 0.1 mm
U-7