Vlan - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

vlan

vlan VLAN-ID [ , | - ]
no vlan VLAN-ID [ , | - ]
Syntax Description
VLAN-ID
,
-
Default
Command Mode
Usage Guideline
Examples
Switch(config)# vlan 1000-1005
Switch(config-vlan)#
Switch(config)# no vlan 1000-1005
Switch(config)#
CLI Reference Guide
Use the vlan configuration command to add VLANs and to enter the config-vlan
mode. Use the no vlan configuration command to remove VLANs. The default
VLAN with the VLAN ID 1, cannot be removed.
Specifies the ID of the VLAN to be added, removed or configured. The valid
VLAN ID range is 1 to 4094.The default VLAN with VLAN id 1 cannot be
removed.
(Optional) Specifies a series of VLANs, or separate a range of VLANs from a
previous range. No space before and after the comma.
(Optional) Specifies a range of VLANs. No space before and after the hyphen.
System has a default VLAN entry with VLAN ID 1.
Global configuration
Use the vlan global configuration command to add VLANs. The valid VLAN ID
range is 1 to 4094. Entering the vlan command with a VLAN ID enters the
config-VLAN mode. When entering the VLAN ID of an existing VLAN, a new
VLAN is not created, but the VLAN parameters can be modified for that VLAN.
When entering the VLAN ID of a new VLAN, the VLAN will be automatically
created. A VLAN in a management domain remains unused until it is assigned
one or more switch ports to the VLAN. Create a new VLAN first and then specify
the module and ports later.
The no vlan global configuration command must be used to remove VLANs.
When removing a non-existing VLAN, an error message will be sent. Default
VLAN with VLAN ID 1 cannot be removed. Removing a VLAN will automatically
remove all port memberships that belong to the VLAN. However if a VLAN is
being associated to a port's access VLAN throught the access VLAN command,
it can not be deleted.
This example shows how to add a new VLAN. It assigns the new VLAN with
VLAN id 1000 to 1005.
This example shows how to remove an existent VLAN with VLAN id 1000 to
1005.
Verify the settings by entering the show vlan command.
vlan
899