Show Monitor Session - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show monitor session

show monitor session [ SESSION-NUMBER | remote | local ]
S yntax De scrip tion
SESSIO N-NUM BER
local
remote
Default
Command Mode
Usage Guideline
Examples
Switch# show monitor session 1
Session 1
Session Type: local session
Destination Port : eth3.1
Ingress Disable
Source Ports :
Both : eth3.2-3.4
RX : eth3.5
TX : eth3.7
Switch#
CLI Reference Guide
Use this command to show all or a specific port mirroring session.
(O ptional) Specify the session num ber which you want to display.
(O ptional) Specify to display local session.
(O ptional) Specify to display remote RSPAN session.
None
User EXEC or any configuration mode
If the command is entered without specifying a session number, all port mirroring
sessions are displayed.
This example shows how to display a created port mirroring session with session
number 1.
This example shows how to display all the created port mirroring sessions.
show monitor session
715