Show Ip Rip Database - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ip rip database

show ip rip database
Syntax
Default
Command Mode
Usage Guideline
Examples
Switch# Show ip rip database
Codes: R - RIP, Rc - RIP connected, Rs - RIP static, K - Kernel,
C - Connected, S - Static, O - OSPF, I - IS-IS, B - BGP
Network
Rc 10.0.0.0/8
Rc 20.0.0.0/8
R 30.0.0.0/8 20.33.24.1
Total Entries: 3 entries, 4 routes
Switch#
Display Field
Descriptions
Display Field
Rc 10.0.0.0/8
Rc 20.0.0.0/8
R 30.0.0.0/8 via ,etc.
CLI Reference Guide
To display summary address entries in the Routing Information Protocol (RIP)
routing database entries, use the show ip rip database command.
None
None
User EXEC or any configuration mode
show ip rip database will display route information, such as: network, next hop,
metric, from, if, time.
The following output shows a summary address.
Next Hop Metric From
40.33.24.8
Description of significant display fields.
Directly connected entry to vlan1.
Directly connected entry to vlan2.
The destination 30.0.0.0/8 is learned via RIP. There are two sources
advertising it. One is 20.33.24.1 via vlan2 and it was updated 16 seconds ago.
The other source is 40.33.24.8 via vlan3, and it was updated 30 seconds ago.
If
1
1
2 20.33.24.1 vlan2
5 40.33.24.2
Description
show ip rip database
Time
vlan1
vlan2
0DT0H2M44S
vlan3 0DT0H2M30S
672