Default-Information Originate (Rip) - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 mm

default-information originate (RIP)

default-information originate
no default-information originate
Syntax
Default
Command Mode
Usage Guideline
Example
Switch# configure terminal
Switch(config)# router rip
Switch(config-router)# default-information originate
CLI Reference Guide
To generate a default route into Routing Information Protocol (RIP), use the
default-information originate command. To disable this feature, use the no
form of this command.
None
Disabled
Router configuration
Issuing this command generates a default route into RIP. The metric will always
be one.
The following example shows how to generate a default route into RIP:
Verify the settings by entering the show running-config command.
default-information originate (RIP)
139