Related Manuals for Makita UM165D
Summary of Contents for Makita UM165D
- Page 1 INSTRUCTION MANUAL Cordless Grass Shear UM165D UM167D 012521 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model UM165D UM167D Effective cutting width 160 mm Stroke per minute (min 1,250 Dimensions (L x W x H) 341 mm x 176 mm x 130 mm 343 mm x 176 mm x 130 mm Battery cartridge... - Page 3 • Makita Corporation responsible measured in accordance with the standard test manufacturer declare that the following Makita method and may be used for comparing one tool machine(s): with another. Designation of Machine: The declared vibration emission value may also be •...
-
Page 4: Save All Warnings And Instructions For Future Reference
GEB070-2 Wear eye protection and stout shoes at all times while operating the machine. CORDLESS GRASS SHEAR Electrical and battery safety SAFETY WARNINGS Avoid dangerous environment. Don't use the WARNING! IMPORTANT READ CAREFULLY all equipment in damp or wet locations or expose it to safety warnings and all instructions BEFORE USE. -
Page 5: Maintenance Instructions
Switch on the motor only when the hands and feet Check loose fasteners and damaged parts such are away from the cutting tool. as cracks in the cutting attachment. Before starting make sure that the cutting tool has Follow instructions for lubricating and changing no contact with any objects. - Page 6 Avoid body contact with earthed or grounded Power tool use and care surfaces such as pipes, radiators, ranges and 17. Do not force the power tool. Use the correct refrigerators. There is an increased risk of power tool for your application. The correct electric shock if your body is earthed or grounded.
- Page 7 Service 10. Before starting work check to make sure that the 28. Have your power tool serviced by a qualified trimmer is in good and safe working order. Ensure repair person using only identical replacement guards are fitted properly. The hedge trimmer parts.
-
Page 8: Functional Description
Do not disassemble battery cartridge. FUNCTIONAL DESCRIPTION If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns CAUTION: and even an explosion. Always be sure that the tool is switched off and the •... -
Page 9: Indication Lamp
In this situation, release the switch trigger on properly and returns to the "OFF" position when the tool and stop the application that caused released. the tool to become overloaded. Then pull the To prevent the switch trigger from being accidentally trigger switch again to restart. - Page 10 To remove the blade cover, take the above installation Adjusting the shearing height procedure in reverse. 1. Change lever Installing or removing base frame 2. Protrusion on base frame CAUTION: 3. Base frame Before installing or removing base frame, be sure •...
- Page 11 accessory shear blades. 1. Crank 2. Undercover 1. Blade cover 3. Shear blades 012537 To install the grass shear blade, prepare the crank, 012533 Remove the base frame and place the tool upside down. undercover and new grass shear blade. 1.
-
Page 12: Operation
1. Base plate 1. Groove in the 2. Hole in the base undercover plate of shear 2. Locking lever blades 3. Oval holes that are overlapped 012541 012544 Overlap the oval hole in the upper blade with that in the At this time, make sure that the locking lever fits in the lower one. -
Page 13: Maintenance
If you need any assistance for more details regarding Shear blade maintenance these accessories, ask your local Makita Service Center. Grass shear blade assembly • 1. Brush Grass shear blade cover •... - Page 14 For removing the grass shear blades, refer to the aforementioned section titled "Installing or removing grass shear blades". For installing the hedge shear blades, refer to the section below titled "Installing or removing hedge shear blades". Hedge shear blade assembly (for Hedge Trimmer) •...
- Page 15 groove in the tool housing. Then make sure that the base 1. Recessed part of plate of the shear blades is set in place. crank 2. Crank 1. Screws 3. Apply grease 4. Pins 012540 Fit the crank with its recessed part facing downward onto the pins.
- Page 16 CAUTION: 1. Screws Never use the tool without installing the undercover • on it. Remove the blade cover and then turn on the tool to check it for proper movement. NOTE: When the shear blades do not operate properly, • there is a poor fit between the blades and crank.
- Page 17 Overreaching with a hedge trimmer, particularly • 1. String from a ladder, is extremely dangerous. Do not work from anything wobbly or infirm. 013055 To cut a hedge top evenly, it helps to tie a string at the desired hedge height and to trim along it, using it as a reference line.
-
Page 18: Optional Accessory
Installing or removing chip receiver (optional accessory) CAUTION: Always be sure that the tool is switched off and the • battery cartridge is removed before installing or removing chip receiver. NOTE: When replacing the chip receiver, always wear • gloves so that hands and face does not directly contact the blade. - Page 20 Makita Corporation Anjo, Aichi, Japan www.makita.com 885095B228...