1. Manuals
  2. Brands
  3. Makita Manuals
  4. Lawn and Garden Equipment
  5. UM164D Series
  6. Instruction manual

Makita UM164D Instruction Manual

Cordless grass shear
Hide thumbs Also See for UM164D:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
INSTRUCTION MANUAL
Cordless Grass Shear
UM164D
010865
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita UM164D

Summary of Contents for Makita UM164D

  • Page 1 INSTRUCTION MANUAL Cordless Grass Shear UM164D 010865 IMPORTANT: Read Before Using.

  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model UM164D Effective cutting width 160 mm Stroke per minute (min 1,250 Dimensions (L x W x H) 292 mm x 178 mm x 130 mm Net weight 1.1 kg Rated voltage D.C. 10.8 V Battery cartridge...
  • Page 3 ENG901-1 Makita Corporation responsible The declared vibration emission value has been • manufacturer declare that the following Makita measured in accordance with the standard test machine(s): method and may be used for comparing one tool Designation of Machine: with another.

  • Page 4: Save All Warnings And Instructions For Future Reference

    GEB070-2 entangled. Wear protective hair covering to contain long hair. CORDLESS GRASS SHEAR Wear eye protection and stout shoes at all times SAFETY WARNINGS while operating the machine. WARNING! IMPORTANT READ CAREFULLY all Electrical and battery safety safety warnings and all instructions BEFORE USE. Avoid dangerous environment.

  • Page 5: Maintenance Instructions

    elsewhere in this manual. Check loose fasteners and damaged parts such Switch on the motor only when the hands and feet as cracks in the cutting attachment. are away from the cutting tool. Follow instructions for lubricating and changing Before starting make sure that the cutting tool has accessories.
  • Page 6 Avoid body contact with earthed or grounded Power tool use and care surfaces such as pipes, radiators, ranges and 17. Do not force the power tool. Use the correct refrigerators. There is an increased risk of power tool for your application. The correct electric shock if your body is earthed or grounded.
  • Page 7 Service shoes with anti-skid soles. 28. Have your power tool serviced by a qualified 10. Before starting work check to make sure that the repair person using only identical replacement trimmer is in good and safe working order. Ensure parts. This will ensure that the safety of the power guards are fitted properly.

  • Page 8: Functional Description

    using battery. FUNCTIONAL DESCRIPTION Do not disassemble battery cartridge. If operating time has become excessively shorter, stop operating immediately. It may CAUTION: result in a risk of overheating, possible burns Always be sure that the tool is switched off and the •...

  • Page 9: Indication Lamp

    Indication lamp 1. Indication lamp 013013 Running the tool allows the indication lamp to show the battery cartridge capacity status. When the tool is also overloaded and has stopped during operation, the lamp lights up in red. Refer to the following table for the status and action to be taken for the indication lamp.
  • Page 10 To install the base frame, fit the protrusion of base frame 1. Shear blades near the change lever into the hole for the sheared grass 2. Base frame height setting. With the base frame so fitted, pull the 3. Blade cover lower part of base frame and fit the other part of the base frame in the groove in the tool.
  • Page 11 1. Undercover 2. Shear blade 3. Crank 1. Basic alignment line on the tool housing 2. Pins 010897 Adjust the three pin position so that these pins are lined up at right angle in relation to the basic alignment line on 010889 Take out the undercover, shear blade and crank in order the tool housing.

  • Page 12: Operation

    NOTE: When the shear blades does not operate properly, • there is a poor fit between the blades and crank. Redo from the beginning. OPERATION WARNING: 010900 Keep hands away from blades. • Turn the shear blades upside down and install it so that CAUTION: the pins on the tool fit in the hole in the shear blades.

  • Page 13: Maintenance

    Discoloration, deformation or cracks may attachment for its stated purpose. result. If you need any assistance for more details regarding Shear blade maintenance these accessories, ask your local Makita Service Center. Grass shear blade assembly • Grass shear blade cover 1. Brush •...
  • Page 14 1. Hedge shear blade 2. Hedge shear blade cover 3. Storage case 011044 Chip receiver for hedge trimming (for Hedge Installing the hedge shear blades • Trimmer) NOTE: Some items in the list may be included in the tool • package as standard accessories.
  • Page 15 1. Bent part of the base plate of shear blades 010909 Turn the shear blades upside down and install it so that pin on the tool fit in the hole in the shear blades. Fit the 1. Crank bent part of the base plate of the shear blades to the 2.
  • Page 16 1. Undercover 1. Groove in the undercover 2. Locking lever 010913 010892 At this time, make sure that the locking lever fits in the Take out the undercover from the tool. groove in the undercover. 1. Screws CAUTION: Never use the tool without installing the undercover •...
  • Page 17 OPERATION 1. Trimming Refer to the Important Safety Instructions before direction operation. 2. Tilt the blades 3. Hedge surface to be trimmed CAUTION: Be careful not to accidentally contact a metal fence • or other hard objects while trimming. The blade will break and may cause serious injury.
  • Page 18 Storage 1. Hook hole 010968 Trim boxwood or rhododendron from the base toward the 013025 top for a nice appearance and good job. The hook hole in the tool bottom is convenient for Installing or removing chip receiver hanging the tool from a nail or screw on the wall. Put the blade cover on the shear blades so that the (accessory) blades are not exposed.
  • Page 20 Makita Corporation Anjo, Aichi, Japan www.makita.com 884947A220...

Table of Contents