Advertisement
Quick Guide of Network Mini Dome Camera
1． Camera Physical Description
Serial NO.
1
2
3
4
P: Power LED indicator, which turns red when power is applied to the unit.
5
6
7
8
When the network is connected, the "S" LED turns orange, while the "L" LED
9
NOTE:
When the camera is power up, press the "Reset" button for about 10 seconds, then all
parameters, including user name, password, IP address, port number, etc., will be reset to the
factory default settings.
Description
Set screw
Bottom board
Bottom board set screw hole
Lens set screw
S & L: Network status LED indicator.
flickers in green.
RESET: Reset all paramaters to factory default settings.
Back box
Lens
1
Advertisement
