Advertisement
After use,
return
the
chuck
key
to
the
storage cavity
on
the
tool.
I
Switch action
Set the reversing switch lever just in front
of the trigger switch to Forward
(FWD)
or
Reverse ( R E V ) . Then pull the trigger to
t u r n the tool ON and release
it
to t u r n it
OFF. To change the direction of bit rota-
tion, release the trigger, let the tool come
t o a complete stop, and then slide the
reversing switch lever to the opposite side.
When the reversing switch lever is
in
the
neutral position, the tool will not start
even if you pull the trigger.
CAUTIONS
:
When not operating the tool, keep the reversing switch lever
in
the neutral position.
0
Before operation, always check to be sure t h a t the reversing switch lever is set for the
desired direction of rotation.
7
Advertisement
