Advertisement
ADDITIONAL SAFETY RULES
FOR CHARGER AND TOOL
1 . The Charger and the tool are specifically designed to work together. Do not
attempt t o charge any other cordless tool with this Charger.
Do
not attempt
t o charge the tool with any other charger.
2. Do not charge the tool when temperature is BELOW 10°C ( 5 O O F ) or ABOVE
45OC (113°F).
3.
Do
not
use
charger
in
damp
or
wet locations.
4.
Do
not attempt to use
a
step-up transformer, an engine generator or DC
5. Do not store the tool in locations where the temperature may reach or exceed
6. Do not incinerate the tool even if it is severely damaged or is completely worn
power receptacle.
5OoC (122OF).
out. The tool can explode in a fire.
ADDITIONAL SAFETY RULES
FOR CORDLESS DRILL
1 . Be aware that this tool is always in an operating condition, because it does
2. Always be sure you have a firm footing
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
5. When drilling into walls, floors or wherever "live" electrical wires may be en-
countered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool only by the plastic handle
or
plastic tool body t o prevent electric
shock if you drill into a "live" wire.
not have t o be plugged into an electrical outlet.
Be sure no one is below when using the tool in high locations.
6. Do not leave the tool running. Operate the tool only when hand-held.
7. Do not touch the drill bit or the workpiece immediately after operation, they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5
Advertisement
