NETGEAR A6200 Installation Manual

802.11ac A6200 WiFi Adapter
Package Contents
A6200
WiFi
Adapter
Installation
Installation Guide
Estimated completion time: 10 minutes.
1. Insert the Resource CD in your computer's CD drive. If the CD main screen
does not display, browse the files on the CD and double-click Autorun.exe.
2. Click Setup.
The Software Update Check screen displays.
3. If you are connected to the Internet, click Check for Updates. If not, then click
Install from CD.
4. Click I agree to accept the license agreement and then click Next.
A message displays asking you to
wait while software is installed. This
might take a few minutes. Then you
are prompted to insert your adapter.
Resource
CD
5. You can use the adapter with or
without the cradle:
• To use the adapter with the
cradle, place the wireless adapter
at least 4 feet (1 meter) away from
your router. NETGEAR
recommends this method.
• To use the adapter without the
cradle, insert the adapter into a
USB port on your computer.
6. Click Next.
NETGEAR Genie displays a list of wireless networks in your area.