NETGEAR ATT-340U Quick Start Manual

Quick Start

AT&T Beam
Find More Information
On the Web
Visit the interactive web tutorial
available at att.com/Tutorials. Select
manufacturer: AT&T; model: Beam.
Additional support is available online,
including troubleshooting and user
forums at att.com/DeviceHowTo.
On the phone
Call AT&T Customer Care at
1-800-331-0500 for assistance with your
AT&T service. When prompted, enter
the 10-digit wireless phone number
associated with your service.
The wireless phone number can be found:
On your monthly statement
On the AT&T AllAccess application Help
section (click the '?' icon on the main
screen)
NETGEAR, the NETGEAR logo, and AirCard are
registered trademarks of NETGEAR, Inc. LTE is
a trademark of ETSI. © 2013 AT&T Intellectual
Property. All rights reserved. AT&T, the AT&T logo
and all other AT&T marks contained herein are
trademarks of AT&T Intellectual Property and/or
AT&T affi liated companies. All other marks contained
herein are the property of their respective owners.
Printed in China 2400271, Rev. 1

Know Your Device

Network
technology
Signal
strength
Network
Data
usage
Flexible hinge
Rotates to accommodate various
USB port confi gurations
Folds up when not in use
SIM and microSD Card
The AT&T Beam comes with a SIM card
already installed. Use a microSD card for
additional storage.
Slide off the back cover.
Insert (or remove) the SIM or microSD
card. Be sure the gold contacts on the
card are facing down.
microSD™
card slot
SIM slot
Reinstall the back cover.

Get Started

Windows 7/Vista/XP*
To install the device and software:
Insert the device in a USB port. If
the installation does not launch
automatically, run setup.exe.
Follow the prompts to install AllAccess.
Click Finish.
* Windows XP 64-bit not supported

Connect to the Internet

Windows 7/Vista/XP
To connect to the AT&T network:
Launch AT&T AllAccess from your
desktop — Double-click the AllAccess desktop — Double-click the AllAccess
icon .
Click the left Connect button.
To disconnect from the AT&T Network:
Click Disconnect.
Network Panel Wi-Fi Panel
Connect to Network Signal
AT&T Network technology strength
Data usage
Help
Notifi cations Settings
Windows 8
To install the device:
Insert the device in a USB port. Drivers
will install automatically.
Then, to connect to the AT&T network and
install the software:
Sign in to your Microsoft account.
Move your cursor to the top
right corner of the screen to
display the Charm bar.
Click Settings.
Click the available networks
icon .
Click AT&T (under Mobile
Broadband).
Click Connect. AT&T AllAccess will
download automatically from the
Windows Store only if you are signed in
to your Microsoft account.
Windows 8
To connect to the AT&T network:
Move your cursor to the top
right corner of the screen to
display the Charm bar.
Click Settings.
Click the available networks
icon .
Click AT&T (under Mobile
Broadband).
Click Connect.
To disconnect from the AT&T Network:
Click Disconnect.
View connection options.
Signal strength
Launch AT&T AllAccess.
Connect to AT&T Network