Dolphin Peripherals/Accessories For The Dolphin 6110; Usb Communication Cable For The Dolphin 6110; Li-Ion Battery Packs; Battery Power - Honeywell Dolphin 6110 User Manual

Dolphin Peripherals/Accessories for the Dolphin 6110

The following items are sold separately and enhance your Dolphin 6110's capabilities.
Dolphin HomeBase
This charging and communication cradle supports USB and RS-232 communication, enabling your
terminal to interface with the majority of enterprise systems. When a terminal is seated in a powered base,
its battery pack charges in an average of 5 1/2 hours for a fully depleted battery. It takes less time if the
battery has some charge.
A spare battery may also be charged in the battery charging well behind the terminal.
For more information, see
Dolphin eBase
™
The Dolphin eBase is used to charge the battery, to power the battery charging system in the terminal,
and can be used to communicate data from the terminal to a PC/laptop via the Ethernet port.
A spare battery may also be charged in the battery charging well behind the terminal.
For more information, see
Dolphin QuadCharger
The Dolphin QuadCharger device, a four-slot charging station for Dolphin Li-Ion battery packs, can
charge each battery in an average of 5 1/2 hours for a fully depleted battery. It takes less time if the
battery has some charge.
For more information, see

USB Communication Cable for the Dolphin 6110

The USB Communication Cable for the 6110 is used when communicating between the terminal and a
PC/laptop via the USB port. The cup-style 6110-USB cable slides onto the bottom of the device lining up
with the connector. The cable unit includes an opening for the power cable. See
Charging/Communication Cable for the Dolphin 6110

Li-Ion Battery Packs

The Li-Ion battery pack provides the main power supply for the terminal. For more information,
Power on page 3-12.
For information on how to purchase these items, contact a Honeywell sales representative.

Battery Power

The battery pack is located on the back panel (see
The battery must be charged to full capacity before using the Dolphin 6110 for the first time!
Charge the battery pack with the Dolphin USB Charging/Communication cable until the LED turns green
(red while charging). The average charge time for a fully depleted battery is 7 1/2 hours. It takes less
time if the battery has some charge.
3-12
Device
™
Dolphin HomeBase/eBase Device
Device
Dolphin HomeBase/eBase Device
Device
™
Dolphin QuadCharger Device
on page 8-1.
on page 8-1
on page 9-1.
on page 6-2.
Battery Pack on page
Connecting the USB
see Battery
3-13)