Chapter 6 - Communication; Wireless & Network Settings; Connecting The Terminal To A Wireless Network; Wi-Fi Network Connections - Honeywell Dolphin 75e User Manual

6
Communication
Wireless & Network Settings
On the Settings
wireless radios in the terminal On or Off and for configuring network connections.
Network + Wireless

Connecting the Terminal to a Wireless Network

You connect the terminal to a wireless network through the on-board radios (802.11a/b/g/n/ac and/or Bluetooth). Each radio has
its own configuration settings and requires specific information about the wireless network to connect. A successful connection
depends on your network infrastructure so you may need to consult your network administrator before attempting a connection.
WLAN (802.11a/b/g/n/ac)
The Dolphin 75e has a 802.11a/b/g/n/ac WLAN (Wireless Local Area Network) radio. The radio is interoperable with other
802.11a/b/g/n/ac, Wi-Fi compliant products including access points (APs), workstations via PC card adapters, and other
wireless portable devices.
Bluetooth
See Working with Bluetooth and NFC Technology

Wi-Fi Network Connections

The Dolphin 75e supports Wi-Fi network connections for open or secure networks that use any of the following security
protocols: WPA/WPA2-Enterprise (PEAP, TLS and TTLS), WPA/WPA2-PSK (AES and Mixed-Mode), WEP, and
default, the terminal Wi-Fi radio is turned On.
screen, under the network + wireless and the extras heading there are options for turning the on board
Extras
on page 7-1.
OPEN. By
6 - 1