Installing The Extended Battery Pack - Honeywell Marathon User Manual

Installing the Extended Battery Pack

Note: Installing or removing accessories should be performed on a clean, well-lit surface. When necessary,
protect the work surface, the Marathon, and components from electrostatic discharge.
The instructions that follow are the same for the 42Whr extended battery and the 62Whr extended battery.
1. Turn the Marathon off. Remove any cables, straps or accessories.
2. Place the Marathon face down on a stable surface.
3. Remove the 2 mounting screws securing the
expose the extended battery pack connector. Put the screws and cover aside in a safe place.
4. Line up the charging pins on the extended battery with the charging pins in the Marathon extended battery connector
bay.
extended battery connector cover (item 5) and then remove the cover to
2-7