Print Quality Settings - Honeywell PC42T User Manual

Appendix B — Default Settings
Media Settings (continued)
Setting Description
Length (Slow If Media Calibration Mode is set to Slow, the printer
Mode) prints the media length plus 10 mm. This value sets
an additional amount of media to be printed. Unit of
measurement is defined in the Unit of Measurement
parameter. Range is 80 to 3200.
Power Up Action Sets the action when you turn the printer on:
• No Action
• Formfeed - The printer feeds one label.
• Testfeed - The printer prints two configuration
Head Down Sets the action when you close the print mechanism
Action after opening it:
• No Action
• Formfeed - The printer feeds one label.
• Testfeed - The printer prints two configuration

Print Quality Settings

Print Quality Settings
Setting Description
Print Speed Sets how fast the printer prints labels. The unit of
measure is defined in the Unit of Measure parameter.
Darkness Sets the image darkness for media and ribbon. Adjust
this parameter with the Media Sensitivity parameter.
Range is 1 to 100.
52
labels as it calibrates the media sensors.
labels as it calibrates the media sensors.
This section describes print quality settings. To view these settings:
• From the printer web page, click the Configure tab > Printing >
Print Quality.
Default
0 dots
No Action
No Action
Default
100
Variable
PC42t Desktop Printer User Guide