Customizing Linear Scan Limit - HIKVISION DS-2CD7153-E User Manual

3. Click the Call Pattern button to call it.
4. Click the Stop Pattern button to stop calling it.

4.2.7 Customizing Linear Scan Limit

Purpose:
The Linear Scan can be enabled to trigger the scan in the horizantal direction in the predefined range.
Note: This function is supported by some certain models.
Steps:
1. Enter the PTZ Control interface.
Menu > Camera > PTZ
2. Use the directional button to wheel the camera to the location where you want to set the limit, and click
the Left Limit or Right Limit button to link the location to the corresponding limit.
Note: The speed dome starts linear scan from the left limit to the right limit, and you must set the left limit
on the left side of the right limit, as well the angle from the left limit to the right limit should be no more
than 180º.
User Manual of Digital Video Recorder
Figure 4. 9 PTZ Panel - General
Figure 4. 10 PTZ Settings
48