Checking Network Status - HIKVISION DS-2CD7153-E User Manual

9.4.3 Checking Network Status

Purpose:
You can also check the network status and quick set the network parameters in this interface.
Steps:
Click Status on the right bottom of the page.
If the network is normal the following message box pops out.
If the message box pops out with other information instead of this one, you can click Network button to show
the quick setting interface of the network parameters.
Figure 9. 39 Network Parameters Configuration
User Manual of Digital Video Recorder
Figure 9. 37 Checking Network Status
Figure 9. 38 Network Status Checking Result
127