Using The Wizard For Basic Configuration - HIKVISION DS-2CD7153-E User Manual

2.2 Using the Wizard for Basic Configuration

By default, the Setup Wizard will start once the DVR has loaded, as shown in Figure 2. 3.
Steps:
1. The Setup Wizard can walk you through some important settings of the DVR. If you do not want to use
the Setup Wizard at this time, click the Cancel button. You can also choose to use the Setup Wizard next
time by leaving the "Start wizard when device starts?" checkbox in checked status.
2. Click Next button on the Wizard window to enter the Login window, as shown in Figure 2. 4.
3. Enter the admin password. By default, the password is 12345.
Note:
You are highly recommended to change the default password right after the first login to avoid safety
problem.
4. To change the admin password, check the New Admin Password checkbox. Enter the new password and
confirm the password in the given fields.
5. Click the Next button to enter the date and time settings window, as shown in Figure 2. 5.
User Manual of Digital Video Recorder
Figure 2. 3 Start Wizard Interface
Figure 2. 4 Login Window
23