Starting Up And Shutting Down The Dvr - HIKVISION DS-2CD7153-E User Manual

2.1 Starting Up and Shutting Down the DVR

Purpose:
Proper startup and shutdown procedures are crucial to expanding the life of the DVR.
Before you start:
Check that the voltage of the extra power supply is the same with the DVR's requirement, and the ground
connection is working properly.
Starting up the DVR
Steps:
1. Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) be used in conjunction with the device.
2. Turn on the power switch on the rear panel, and the Power indicator LED should turn on indicating that
the unit begins to start up.
3. After startup, the Power indicator LED remains on.
Shutting down the DVR
Steps:
There are two proper ways to shut down the DVR. To shut down the DVR:

OPTION 1: Standard shutdown
1. Enter the Shutdown menu.
Menu > Shutdown
2. Select the Shutdown button.
3. Click the Yes button.
4. Turn off the power switch on the rear panel when the note appears

OPTION 2: By operating the front panel
1. Press and hold the POWER button on the front panel for 3 seconds.
User Manual of Digital Video Recorder
Figure 2. 1 Shutdown Menu
Figure 2. 2 Shutdown Tips
21