C6800-16P10G And C6800-16P10G-Xl Ethernet Modules - Cisco Catalyst 6800 Installation Manual

C6800-16P10G and C6800-16P10G-XL Ethernet Modules

C6800-16P10G and C6800-16P10G-XL Ethernet Modules
The C6800-16P10G and C6800-16P10G-XL Ethernet modules provide sixteen 10G or sixteen 1G transceiver
ports.
Figure 4: C6800-16P10G-XL Ethernet Module Front Panel
1
2
3
2 40G ports are currently not supported
The sticker on the module faceplate identifies it as either a C6800-16P10G or a C6800-16P10G-XL depending
on whether a WS-F6K-DFC4-E or WS-F6K-DFC4-EXL daughter card is installed on the module.
Table 4: C6800-16P10G and C6800-16P10G-XL Ethernet Module Features
Feature
Ports per module
Port connector type
Cabling distance
Catalyst 6800 Ethernet Module Installation Guide
10
Status and ID LEDs
2
40G port IDs
10G ports (A total of four port groups)
4 Port group ID
5 Port number
6 RFID
Description
• 16 ports—Sixteen 1G ports, or sixteen 10G ports.
• Ports are numbered left to right.
• 2 port groups. Port ranges per port group:
• 1 to 8
• 9 to 16
LC (optical) or RJ-45 (copper) depending on the SFP transceiver
installed.
Depends on the SFP transceiver installed in the module port. For
cabling distance information, refer to the installation guides for
Cisco Transceiver Modules at:
Ethernet Switching Modules Overview
Install and Upgrade Guides