NETGEAR C6300BD User Manual page 35

AC1900, N900, and N450 WiFi Cable Data Gateways
Field Description
Wireless Network (5GHz a/n/ac)
Note: Models AC1900 and N900 support the 5 Ghz band. Model N450 does not.
Enable Wireless By default, WiFi clients that are connected to the 5 GHz WiFi band of the cable data
Isolation gateway can access each other and Ethernet devices that are connected to the cable
data gateway. As an additional security measure, you can prevent WiFi from doing so
by selecting the Enable Wireless Isolation check box.
Enable SSID By default, the cable data gateway broadcasts its SSID of the 5 GHz WiFi band so that
Broadcast WiFi stations can detect the WiFi name (SSID) in their scanned network lists. To turn
off the SSID broadcast for the 5 GHz WiFi band, clear the Enable SSID Broadcast
check box.
Name (SSID) The SSID is the 5 GHz WiFi band name. If you did not change the SSID, the default
SSID displays. The default SSID for the 5 GHz WiFi band is also printed on the product
label.
Best practise is not to change the default SSID. If you must change the SSID, enter a
32-character (maximum), case-sensitive name in this field.
Channel From the Channel menu, select Auto for automatic channel selection for the 5 GHz
WiFi band, or select an individual channel. The default selection is Auto.
Note:
connections or slow data transfers). If this happens, experiment with different channels
to see which is the best.
Mode From the Mode menu, select one of the following modes for the 5 GHz WiFi band. The
available mode depends on the model:
• Model N900:
- Up to 289 Mbps. Legacy mode. This mode allows 802.11na and 802.11a
devices to join the network but limits 802.11na devices to function at up to
289 Mbps.
- Up to 450 Mbps. Neighbor-friendly mode for reduced interference with
neighboring WiFi networks. This mode allows 802.11naand 802.11a devices to
join the network but limits 802.11na devices to function at up to 450 Mbps.
- Up to 600 Mbps. Performance mode. This mode allows 802.11na and 802.11a
devices to join the network and allows 802.11na devices to function at up to
600 Mbps. This mode is the default mode.
• Model AC1900:
- Up to 289 Mbps. Legacy mode. This mode allows 802.11ac, 802.11na, and
802.11a devices to join the network but limits 802.11ac and 802.11na devices to
function at up to 289 Mbps.
- Up to 600 Mbps. Neighbor-friendly mode for reduced interference with
neighboring WiFi networks. This mode allows 802.11ac, 802.11na, and 802.11a
devices to join the network, allows 802.11na devices to function at up to
600 Mbps, but limits 802.11ac devices to function at up to 600 Mbps.
- Up to 1300 Mbps. Performance mode. This mode allows 802.11ac, 802.11na,
and 802.11a devices to join the network and allows 802.11ac devices to function
at up to 1300 Mbps. This mode is the default mode.
Configure Parental Controls and Basic WiFi Settings
Do not change the channel unless you experience interference (shown by lost
35