NETGEAR C6300BD User Manual page 13

AC1900, N900, and N450 WiFi Cable Data Gateways
Figure 4. Front panel buttons and LEDs of the N900
You can use the LEDs to verify status and connections. The following table lists and
describes each LED and the WPS button on the front panel.
Table 2. LEDs and front panel buttons of the N900
LED Icon
WPS button
and LED
2.4 GHz WiFi
WPS button
WPS LED
2.4 GHz WiFi LED
5 Ghz WiFi LED
Power LED
Downstream LED
Upstream LED
Internet LED
LAN Ethernet LEDs
Description
Press the WPS button to open a two-minute window for the cable data gateway to
connect with other WPS-enabled devices.
The WPS LED blinks green during this two-minute period. For more information
about using the WPS method to implement WiFi security, see the following sections:
• Join the WiFi Network of the WiFi Cable Data Gateway
• Use the WPS Wizard to Add a Device to the WiFi Network
• Solid green. The 2.4 GHz WiFi radio is functioning and available for use.
• Blinking. The 2.4 GHz WiFi radio is processing traffic.
• Off. The 2.4 GHz WiFi radio is disabled. (If the radio is disabled, see
WiFi Radios on page 109.)
Hardware Overview
13
Nonfunctional button
on page 26
on page 52
Control the