NETGEAR C6300BD User Manual page 113

Note: If you use a WiFi computer to set up a WiFi access list, add your WiFi
computer to the access list; otherwise, you are disconnected when
you click the Apply button. To avoid this situation, use a computer
with a wired connection to access the cable data gateway.
Set Up and Enable a WiFi Access List
You can add one or more devices to the WiFi access list for the main WiFi network and the
guest WiFi network. The cable data gateway supports two access lists: one for the main WiFi
network and one for the guest WiFi network.

To restrict WiFi access based on MAC addresses:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter http://routerlogin.net.
You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings screen displays (that is, the screen to configure advanced
settings).
AC1900, N900, and N450 WiFi Cable Data Gateways
Configure Advanced Features
113