Factory Default Settings - NETGEAR C6300BD User Manual

Factory Default Settings

You can return the cable data gateway to its factory default settings (see
Cable Data Gateway to Its Factory Default Settings
the factory default settings.
Table 5. Factory default settings
Feature
Router Login
Local area network
(LAN)
Wide area network
(WAN) and security
AC1900, N900, and N450 WiFi Cable Data Gateways
User login URL
User name (case-sensitive)
Login password (case-sensitive) password
LAN IP address
Subnet mask
DHCP server
DHCP range
DHCP start IP address
DHCP end IP address
UPnP
Port scan protection
DoS protection
Default DMZ server
Respond to ping on Internet port Enabled
MTU size
SIP ALG
NAT
Remote management over WAN Disabled
Inbound communication from the
Internet
Outbound communication to the
Internet
Sites blocked
Services blocked
Factory Default Settings and Specifications
on page 94). The following table shows
Default Settings
http://routerlogin.net or http://192.168.0.1
admin
192.168.0.1
255.255.255.0
Enabled
192.168.0.2 to 192.168.0.254
192.168.0.2
192.168.0.254
Enabled
Enabled
Enabled
Disabled
Uses the maximum MTU value for best throughput
Enabled
Enabled
Disabled, except for traffic on port 80 (the HTTP port) in
response to requests from the LAN
Enabled
None
None
164
Return the WiFi