NETGEAR C6300BD User Manual page 124

AC1900, N900, and N450 WiFi Cable Data Gateways
8. Specify the custom service or application.
The following table describes the fields on the Ports - Custom Service screen.
Field
Service Name
Service Type
External Starting Port
External Ending Port
Use the same port
range for Internal port
Internal Starting
Port
Internal Ending Port This field is automatically completed when you enter a port number in the Internal
Description
Enter a descriptive name.
From the menu, select the correct type of protocol for the service or application
(TCP, UDP, or TCP/UDP).
Note: If you are not sure which protocol to select, select TCP/UDP.
Enter the external starting port number for the service or application.
If the service or application uses a single port, enter the same port number that
you enter in the External Starting Port field.
If the service or application uses a range of ports, enter the ending port number of
the range.
If the service or application uses the same internal ports port numbers that you
specify for the external ports, select the check box.
If the service or application does not use the same internal ports port numbers that
you specify for the external ports, enter the internal starting port number for the
service or application.
Starting Port field.
Configure Advanced Features
124