Appendix G: Installing The Network Protocols For Windows 95, 98, And Me; Figure G-1: Control Panel; Figure G-2: Configuration Tab - Cisco Linksys LNE100TX User Manual

EtherFast 10/100 LAN Card
Appendix G: Installing the Network Protocols for
Windows 95, 98, and ME
1. From the Start Menu, select Settings and open the Control Panel. From the Control Panel, shown in Figure
G-1, double-click on the Network icon.
2. On the Configuration tab, select the Linksys LNE100TX(v5) Fast Ethernet Adapter from the list, shown in
Figure G-2. Click the Add button.
From this screen, you can also press the Properties button. You can then verify that the drivers are working
under Enhanced Mode on the Driver Type tab, or reconfigure the Card on the Advanced tab.

Appendix G: Installing the Network Protocols for Windows 95, 98, and ME

NOTE: Before adding any network protocols,
make sure that the protocol is not already
installed. Never install duplicate protocols.

Figure G-1: Control Panel

Figure G-2: Configuration Tab

54