Figure 5-4: Reboot; Figure 5-5: Driver Install Successful; Figure 5-6: Driver Install Successful For Win 2000 - Cisco Linksys LNE100TX User Manual

EtherFast 10/100 LAN Card
If you are using Windows 2000, you will see the screen shown in Figure 5-4. On this screen, you will need to
type your computer's name in the appropriate field. Then, click the Driver Install button to continue.
5. The drivers will now be installed.
If you are using Windows 95, 98, Millennium, or XP, you will see the screen shown in Figure 5-5.This signifies
that the driver installation is complete and your system will reboot.
If you are using Windows 2000, you will see the screen shown in Figure 5-6. If requested to reboot, do so
manually at this time. This signifies that the driver installation is complete. You should now reboot your
system.
Chapter 5: Installing the Drivers with the Setup Utility
Using the Setup Utility
Driver installation is complete.

Figure 5-4: Reboot

Figure 5-5: Driver Install Successful

Figure 5-6: Driver Install Successful for Win 2000

10