Table of Contents
Advertisement
EtherFast 10/100 LAN Card
5. When the Found New Hardware Wizard box appears, insert the LNE100TX 10/100 LAN Card Setup Utility CD
into your CD-ROM drive. In the "Copy manufacturer's files from" field, type D:\, as shown in Figure 6-52, and
click the OK button
IMPORTANT: Before proceeding, ensure that you are operating Windows 2000
with administrative rights. If you log into Windows 2000 without administrative
rights, you may run into problems during the installation.
IMPORTANT: Do not press Skip or Cancel or the drivers will not be installed!
6. The Driver File Search Results dialog box will appear, shown in Figure 6-53. Click the Next button to continue.
7. The Completing the Found New Hardware Wizard dialog box will appear, as shown in Figure 6-54. Click the
Finish button to complete the installation.
8. Remove any disks from your drives.
The Windows 2000 driver installation is complete.
If you want to share files or printers, refer to your Windows 2000 documentation.
Chapter 6: Manual Installation and Setup
Windows 2000
Figure 6-52: Insert the Setup CD
Figure 6-53: Driver Files Search Results
Figure 6-54: Installation Complete
33
Advertisement
Table of Contents
