Appendix E: Starting Over In Windows 95, 98, Me, 2000, Or Xp; Starting Over In Windows 95, 98, Or Xp; Figure E-1: Network - Cisco Linksys LNE100TX User Manual

EtherFast 10/100 LAN Card
Appendix E: Starting over in Windows 95, 98, ME, 2000, or
XP
If you experience installation difficulties, you may need to re-install all of the Windows networking components.
The instructions below explain how to give your PC a clean sweep so that you can retry the EtherFast® 10/100
LAN Card's driver installation.

Starting Over in Windows 95, 98, or XP

1. At the desktop click on the Start Button, highlight Settings, click on Control Panel.
2. Double-click on the Network Icon.
3. If the Configuration box, shown in Figure E-1, has a component called Dial-Up Adapter, skip forward to step
five. If it doesn't, continue with step four.
NOTE: The screens in this section may appear
different than are shown, depending on your
Windows operating system.

Appendix E: Starting over in Windows 95, 98, ME, 2000, or XP

Starting Over in Windows 95, 98, or XP

Figure E-1: Network

48