Main Menu → Display Settings - GE DSR-2000e User Manual

Main Menu → Record Settings → Video Quality
o
Use the Jog to select the desired Record Quality. Select High,
Med, Standard, or Custom.
Higher record qualities use lower compression, requiring more
disk space. Selecting Custom allows you to set a custom file size
from 13.0k to 33k.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
NOTE
Note: The option to select a Custom file size is only available when the Multiplexer
Format is set to None. Multiplexer Format is located in the Advanced Menu.
Main Menu → Display Settings
4.5
Use this menu to specify what status information will be displayed on
the primary monitor. Select On or Off, for the following items.
•
The current time and date.
•
The remaining amount of time before the hard disk runs
out of record space.
•
The Archive Status.
•
The time and date of the last alarm.
•
The Record or Playback Speed.
•
During Playback, the time and date the recording was
made.
Main Menu → Display Settings → Current Time / Date
o
To display the current Time and Date near the upper right hand corner of the primary monitor,
select ON. Use the Jog to select On or Off.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
--OR—
--OR—
Record Quality
Select Quality
Custom
Select Filesize
33.0 kBytes
Current Time / Date
Record Capacity
Archive Status
Last Alarm
Record Playback Speed
Playback Time / Date
OFF
ON