Table of Contents
Advertisement
Main Menu → Time/Date → Set Region
o
Use this menu option to set the region for the Auto
Daylight Savings Time feature. Choices are:
•
OFF: Clock will not be changed automatically.
•
USA: DST starts at 02:00 on the first Sunday in
April. DST ends at 02:00 on the last Sunday in
October. Includes: United States (except Hawaii,
American Samoa, Guam, Puerto Rico, Virgin
Islands, parts of Indiana and Arizona) and
Canada (except Saskatchewan).
•
EUR: DST starts at 01:00 GMT on the last
Sunday in March. DST ends at 01:00 GMT on
the last Sunday in October. Includes: European
Union Countries.
•
AUS: DST starts at 02:00 on the last Sunday in
October. DST ends at 03:00 on the last Sunday
in March. Includes: South Australia, Victoria,
ACT, NSW. Excludes: Tasmania.
The clock will only be automatically adjusted once on a given time and date. If you manually set the
clock back before the last DST change, the time will not get automatically adjusted again for that same
time change.
Main Menu → Time/Date → Network Time Setup
q
Use this menu to enable/disable and specify how often time synchronization should occur between the
DSR and the Network Server. The Region /Time Zone must be setup prior to enabling the option.
Update Interval, Select from: Enable, Disable, Once per Day, Twice per Day, and Once per Hour
NTP Primary Server: Enter IP Address of Primary Server.
NTP Backup Server: Enter IP Address of Backup Server.
1. To save changes and exit the menu: Select [OK], then press the Enter button.
2. To exit the menu without making changes: Press the Menu button, or select [CANCEL], and then
press the Enter button.
Last Update: Never Since Power-up
Warning: Region/Time Zone must be set correctly!
Network Time Protocol Setup
Update Interval
NTP Primary Server
NTP Backup Server
[CANCEL]
Daylight Saving :
Time Zone
SUN,
SUN, 26 OCT 2003 02:00 (-1)
:
DISABLE
:
3. 37.
8. 26
:
0.
0.
0.
0
[OK]
Regional Settings
USA
:
GMT+07:00
6 APR 2003 02:00 (+1)
[CANCEL]
[OK]
Advertisement
Table of Contents
