The Search Interface - GE DSR-2000e User Manual

Pause
During playback, press the Pause button to pause playback, and display a single
frame on-screen.
Pause is indicated:
•
As PAUSE near the upper left hand corner of the primary monitor, for
three seconds.
•
As PAUSE on the LCD.
Single Frame Advance & Single Frame Rewind
During Pause mode, rotate the Jog dial to view the frame directly before or after
the frame displayed on-screen.
AutoPause
During playback, moving the Jog (the inner dial) in any direction will freeze
playback. Depress the Freeze or any Play button to continue playback.
Start of Data & End of Data
If the start or end of data is reached during playback, START OF DATA or END OF DATA is indicated
near the upper left hand corner of the primary monitor.
2.3

The Search Interface

The Search Interface feature allows the user to search the hard disk for recorded
events, such as an alarm condition, or a previous recording session. For example,
each time Record mode is activated, it is considered a separate recording
session.
To enter the Search Filters menu, press the Search button. The Search Filters
menu is displayed on the primary monitor.
Use this to specify:
•
The Start and Stop date of
the search.
•
The Start and Stop time of
the search.
•
Which cameras to search
exclusively.
•
To search for recorded
alarms.
Search Filters
Start
DATE: 12/25/00 [ ]
(MM/DD/YY)
Start
TIME: 11:11:21 [ ]
1 2 3 4
CAMERA: [ ][ ][ ][ ][ ][ ][ ][ ]
ALARM: [ ]
[CANCEL]
PAUSE
Pause button
REW
Jog / Shuttle
SEARCH
Search button
Stop
01/01/01 [ ]
(MM/DD/YY)
Stop
12:34:34 [ ]
5 6 7 8
[START SEARCH]
FF