Main Menu → Timer Settings - GE DSR-2000e User Manual

Hide thumbs

Table Of Contents

Table of Contents

Main Menu → Timer Settings

4.3

This menu allows the user to

program a timed-recorded

event. Use this menu to

specify:

•

The date, or days on

which the recording

will occur.

•

The start and stop

time.

•

The record speed.

•

The record quality.

•

Whether the event is

enabled.

Creating a Timed Recording:

1. Using the Jog / Shuttle to navigate, highlight the DATE parameter of the last line item (indicated

with double dash marks).

2. Press the Enter button to enter the Edit mode. EDIT MODE will appear on-screen, in the lower

left-hand corner of the Timer Settings menu. The user may press the Enter button to exit Edit

mode at any time.

3. Use the Jog to change the values of the DATE setting.

Date (Day of the Month)

Day of the Week

Range of Days

4. When finished entering the Date, use the Shuttle to navigate the START setting.

5. Use the Jog / Shuttle to enter the time the recording will begin. The Hours and Minutes are

edited separately. The start and stop times are always configured in a 24-hour clock. When

finished entering the start time, use the Shuttle to navigate to the STOP setting.

6. Use the Jog / Shuttle to enter the time the recording will end. Entering a time "before" the start

time will cause the unit to record until the indicated stop time on the next day. When finished

entering the stop time, use the Shuttle to navigate to the SPD setting.

7. Use the Jog to enter the record speed in pictures per second.

NTSC Record Speeds

PAL Record Speeds

8. When finished entering the Record Speed, use the Shuttle to navigate to the QUALITY setting.

9. Use the Jog to enter the record quality (Low, Medium, or High). Higher record quality settings use

more disk space.

DATE

START