Cisco Catalyst 2950 Software Configuration Manual page 71

Chapter 3 Getting Started with CMS
Table 3-11 Menu Bar (continued)
Menu-Bar Options
Device
5
Device Manager
1
Host Name
2
STP
2
IGMP Snooping
1
802.1X
2 6
ACL
1
(guide mode available )
1 6
Security Wizard
2
QoS
(guide mode available on some
1
options )
1
AVVID Wizards
Port
2
Port Settings
Port Search
1
Port Security
2
EtherChannels
2
SPAN
2
Protected Port
2
Flooding Control
78-11380-04
Task
Launch Device Manager for a specific switch.
Change the host name of a switch.
Display and configure STP parameters for a switch.
Enable and disable Internet Group Management Protocol (IGMP) snooping and IGMP
Immediate-Leave processing on the switch. Join or leave multicast groups, and configure
multicast routers.
Configure 802.1X authentication of devices as they are attached to LAN ports in a
point-to-point infrastructure.
Create and maintain access control lists (ACLs), and attach ACLs to specific ports.
Filter certain traffic, such as HTTP traffic, to certain users or devices.
Display submenu options to enable and disable quality of service (QoS) and to configure
or modify these parameters:
2 6
• Trust settings
2
• Queues
2 6
• Maps
2 6
• Classes (guide mode available
2 6
Policies (guide mode available
•
1
Voice Wizard —Configure a port to forward voice traffic with an 802.1P priority and
•
to configure the port as an access port and as a member of the voice VLAN (VVID).
1
Video Wizard —Optimize multiple video servers for sending video traffic.
•
1
Data Wizard —Provide a higher priority to specific applications.
•
Display and configure port parameters on a switch.
Search for a port through its description.
Enable port security on a port.
Group ports into logical units for high-speed links between switches.
Enable Switch Port Analyzer (SPAN) port monitoring.
Configure a port to prevent it from receiving bridged traffic from another port on the
same switch.
Block the normal flooding of unicast and multicast packets, and enable the switch to
block packet storms.
1
)
1
)
Catalyst 2950 Desktop Switch Software Configuration Guide
Menus and Toolbar
6
6
6
3-17