Displaying The Mst Configuration And Status - Cisco Catalyst 2950 Software Configuration Manual

Chapter 11 Configuring RSTP and MSTP

Displaying the MST Configuration and Status

To display the spanning-tree status, use one or more of the privileged EXEC commands in
Table 11-4 Commands for Displaying MST Status
Command
show spanning-tree mst configuration
show spanning-tree mst instance-id
show spanning-tree mst interface interface-id Displays MST information for the specified interface. Valid interfaces
For information about other keywords for the show spanning-tree privileged EXEC command, refer to
the Catalyst 2950 Desktop Switch Command Reference for this release.
78-11380-04
Purpose
Displays the MST region configuration.
Displays MST information for the specified instance.
include physical ports, VLANs, and port channels. The valid VLAN range
is 1 to 4094; the valid port-channel range is 1 to 6.
Catalyst 2950 Desktop Switch Software Configuration Guide
Displaying the MST Configuration and Status
Table 11-4:
11-23