Connecting a Modem to the Auxiliary Port
Terminal Emulator Settings
Use the following settings for the terminal emulator connection:
•
•
•
•
When the terminal emulator establishes communications, the router prompt is displayed.
For more information on terminal emulation settings, see
for Console Connections.
Connecting a Modem to the Auxiliary Port
To connect a modem to the router, follow these steps:
Connect the RJ-45 end of the adapter cable to the Aux port on the router as shown in
Step 1
Figure 3-6
1
2
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
3-10
9600 baud
8 data bits, no parity
1 stop bit
No flow control
Connecting a Modem to the Aux Port
2
Aux port (RJ-45)
Light blue console cable
Applying Correct Terminal Emulator Settings
1
3
DB-9 to DB-25 modem adapter (if required)
4
Modem
Chapter 3
Connecting the Router
Figure
3
4
OL-16215-10
3-6.