Cisco 860 Series Hardware Installation Manual page 42

Cisco 890 Series ISRs
Figure 1-33
Figure 1-33
1 GE WAN interface
2 SFP port
3 USB port
4
8-port Gigabit Ethernet switch
5
Console / Auxiliary port
6 Power connector
1. Port 0 through 3 can be configured as POE. POE is an optional feature for this model. If this feature was not configured with
the factory order, you must order and install it to enable the PoE function.
Caution
Figure 1-34
Figure 1-34
1 LEDs
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
1-26
shows the back panel of the Cisco 898EA router.
Back Panel of the Cisco 898EA Router
11
GE WAN
SFP
8 8
1 2
1
The primary WAN port is designed for an RJ-45 connector only. Damage to the primary WAN
port may occur if a non-RJ-45 connector is inserted.
shows the front panel of the Cisco 898EA router.
Front Panel of the Cisco 898EA Router
1
7 6 GELAN 5
3 2 POE 1
3 4
7 On/Off switch
8 Reset button
9 Earth ground connection
10 Kensington security slot
11 SHDSL (RJ45 Only)
Chapter 1 Product Overview
Cisco 898EA
4
CONSOLE
RESET
AUX 54VDC 1.2A
0
12VDC 2.5A
5 6 7 8 9 10
OL-16215-10