Connecting The Ac Adapter - Cisco 860 Series Hardware Installation Manual

Connecting the AC Adapter

Figure 3-24
1
2
3
The Cisco 880 series ISRs with embedded WLAN antennas require a single external power supply: a
30-W power supply for non-POE-enabled routers or a 60-W power supply for POE-enabled routers. For
the back panels of some of these routers, see

Connecting the AC Adapter

Warning The device is designed to work with TN power systems. Statement 19
Warning This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that
the protective device is rated not greater than:
120 VAC, 20 A U.S. (240 VAC, 16 to 20 A international). Statement 1005
This unit might have more than one power supply connection. All connections must be removed to
Warning
de-energize the unit. Statement 1028
The Cisco 892FSP utilizes a single 4-pin power connector type.
Note
assignment of the Cisco 892FSP Power Adapter Connector.
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
3-28
Connecting PoE for the Cisco 880 and the Cisco 890 Series Routers
4
4
48-VDC PoE input jack
Power cord
Power adapter—48 VDC
1
3
2
4
AC plug
5
12-VDC input power-jack plug
6 Power adapter—12 VDC
Figure 1-17 and Figure 1-19.
Figure 3-27
Chapter 3 Connecting the Router
5
2
6
shows the pin number
OL-16215-10