Cisco 860 Series Hardware Installation Manual page 69

Chapter 2 Installing the Router
Figure 2-4
1
Wall-mount holes
Insert the screws, with anchors, into the wall. Leave 1/8 inch (0.32 cm) between the screw head and the
Step 2
wall. See
Hang the router on the screw without forcibly pushing towards the wall side. The screw head may
Step 3
damage the protection wall inside. Place the power adapter on a nearby horizontal surface. See
Figure
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-10
Wall-mount Holes on the Underside of the Router
1
Figure 2-5.
2-5.
8.200 in.
Installing the Router
3.673 in.
1
5.961 in.
2-9